Hoppa till innehåll
Hitachi Energy
Contact us Search
Home
Back to search

PEXLIM P264-ZH300

This surge arrester provides protection for switchgear, transformers and other equipment in high voltage systems against atmospheric and switching overvoltages.

Especially suitable for applications where:

–  The installation location is in an area with very high lightning intensity

–  Grounding or shielding conditions are poor or incomplete

–  The protected equipment is of especially importance

–  Energy requirements are very high (e.g. very long lines, capacitor protection)

 

The PEXLIM P-Z is superior where low weight, reduced clearances, flexible mounting, non-fragility and additional personnel safety is required.

Contact sales
General data
Unit
Neutral ground arrester
No
Family name
PEXLIM
Type designation
P264-ZH300
Design
MO, Gapless
Manufacturer country
Hitachi Energy, Sweden
Maximum system voltage (Us)

kVrms
300
Arrester classification as per IEC 60099-4 Ed. 3.0

Class
Station; SH
Nominal discharge current

kApeak
20
Rated voltage (Ur)

kVrms
264
Maximum continuous voltage (Uc)

kVrms
191
Frequency

Hz
15-62
TOV capability (after thermal energy rating Wth)
1s

kVrms
291
10s

kVrms
276
Charge, energy and current withstand data
Repetetive charge transfer rating Qrs

C
3,2
Thermal energy rating Wth

kJ/kV (Ur)
11
Discharge current withstand strength
High current, 4/10 μs

kApeak
100
Low current, 2000 μs

Apeak
1600
Single-impulse Single-impulse withstand rating (IEEE), Repetitive charge transfer test value (IEC) - sample tests on all manufactured block batches

C
4
Energy data as per previous IEC standard IEC 60099-4, Ed 2.2
Line discharge class

Class
4
Energy capability - thermal energy capability (as per IEC 60099-4 Ed 2.2, clause 8.5.5)

kJ/kV (Ur)
11
Guaranteed max. protective data
Maximum residual/discharge voltage with current wave 30/60 μs (slow-front/switching)
0.5 kA

kVpeak
495
1.0 kA

kVpeak
508
2.0 kA

kVpeak
526
Maximum residual/discharge voltage with current wave 8/20 μs (fast-front/lightning)
5.0 kA

kVpeak
565
10 kA

kVpeak
595
20 kA

kVpeak
651
Maximum residual/discharge voltage with current wave 1/(2-20) μs (FOW as per IEEE, steep front as per IEC) External inductive effects neglected
10 kA

kVpeak
634
Technical data for housing
Short-circuit capability
High current, 0.2 s

kArms
65
Low current

Arms
600
External insulation - Requirements as per IEC 60099-4
LIWL, 1.2/50 μs

kVpeak
847
50 Hz, wet (60 s)

kVrms
381
SIWL, wet (250/2500 μs)

kVpeak
654
External insulation - Sum of tested values on individual empty unit housing
LIWL, 1.2/50 μs

kVpeak
1079
50 Hz, wet (60 s)

kVrms
533
SIWL, wet (250/2500 μs)

kVpeak
870
Creepage distance (nominal)
mm

mm
8289
mm/kV (Us)

mm/kV (Us)
28
Creepage distance class
Heavy (25 mm/kV (Us))
Specified long-term load (SLL)

Nm
3000
Specified short-term load (SSL)

Nm
6000
Insulator colour/material
Grey Silicone
Dimensions
3f
Mass (kg)
92
Amax (mm)
2133
B (mm)
800
C (mm)
-
D (mm)
200
Shipping data
Unit
1-pack
Volume

kg
1,2
Gross

kg
117
2-pack
Volume

m3
1,24
Gross

kg
219
3-pack
Volume

m3
1,24
Gross

kg
301
6-pack
Volume

m3
-
Gross

kg
-
Each crate contains a certain number of arrester units and accessories for assembly and erection. A packing list is attached externally on each crate. Each separate crate is numbered and the numbers of all crates and their contents are listed in the shipping specification. Hitachi Energy reserves the right to pack arresters in the most effective/economic combination. Alternate or non-standard crates may involve additional charges. The table above is to be seen as an approximation and specific data for deliveries may differ from the values given.