Hoppa till innehåll
Hitachi Energy
Contact us Search
Home
Back to search

PEXLIM P390-YH420

This surge arrester provides protection for switchgear, transformers and other equipment in high voltage systems against atmospheric and switching overvoltages.

Especially suitable for applications where:

–  The installation location is in an area with very high lightning intensity

–  Grounding or shielding conditions are poor or incomplete

–  The protected equipment is of especially importance

–  Energy requirements are very high (e.g. very long lines, capacitor protection)

–  Additional mechanical strength is desirable

 

The PEXLIM P-Y is superior where low weight, reduced clearances, flexible mounting, non-fragility and additional personnel safety is required.

Contact sales
General data
Unit
Neutral ground arrester
No
Family name
PEXLIM
Type designation
P390-YH420
Design
MO, Gapless
Manufacturer country
Hitachi Energy, Sweden
Maximum system voltage (Us)

kVrms
420
Arrester classification as per IEC 60099-4 Ed. 3.0

Class
Station; SH
Nominal discharge current

kApeak
20
Rated voltage (Ur)

kVrms
390
Maximum continuous voltage (Uc)

kVrms
267
Frequency

Hz
15-62
TOV capability (after thermal energy rating Wth)
1s

kVrms
430
10s

kVrms
409
Charge, energy and current withstand data
Repetetive charge transfer rating Qrs

C
3,2
Thermal energy rating Wth

kJ/kV (Ur)
11
Discharge current withstand strength
High current, 4/10 μs

kApeak
100
Low current, 2000 μs

Apeak
1600
Single-impulse Single-impulse withstand rating (IEEE), Repetitive charge transfer test value (IEC) - sample tests on all manufactured block batches

C
4
Energy data as per previous IEC standard IEC 60099-4, Ed 2.2
Line discharge class

Class
4
Energy capability - thermal energy capability (as per IEC 60099-4 Ed 2.2, clause 8.5.5)

kJ/kV (Ur)
11
Guaranteed max. protective data
Maximum residual/discharge voltage with current wave 30/60 μs (slow-front/switching)
0.5 kA

kVpeak
739
1.0 kA

kVpeak
758
2.0 kA

kVpeak
784
Maximum residual/discharge voltage with current wave 8/20 μs (fast-front/lightning)
5.0 kA

kVpeak
844
10 kA

kVpeak
888
20 kA

kVpeak
973
Maximum residual/discharge voltage with current wave 1/(2-20) μs (FOW as per IEEE, steep front as per IEC) External inductive effects neglected
10 kA

kVpeak
946
Technical data for housing
Short-circuit capability
High current, 0.2 s

kArms
65
Low current

Arms
600
External insulation - Requirements as per IEC 60099-4
LIWL, 1.2/50 μs

kVpeak
1264
50 Hz, wet (60 s)

kVrms
588
SIWL, wet (250/2500 μs)

kVpeak
980
External insulation - Sum of tested values on individual empty unit housing
LIWL, 1.2/50 μs

kVpeak
2017
50 Hz, wet (60 s)

kVrms
1005
SIWL, wet (250/2500 μs)

kVpeak
1621
Creepage distance (nominal)
mm

mm
12613
mm/kV (Us)

mm/kV (Us)
30
Creepage distance class
Heavy (25 mm/kV (Us))
Specified long-term load (SLL)

Nm
6000
Specified short-term load (SSL)

Nm
9000
Insulator colour/material
Grey Silicone
Dimensions
4e
Mass (kg)
188
Amax (mm)
3740
B (mm)
1400
C (mm)
1000
D (mm)
700
Shipping data
Unit
1-pack
Volume

kg
1,85
Gross

kg
298
2-pack
Volume

m3
-
Gross

kg
-
3-pack
Volume

m3
2,19
Gross

kg
675
6-pack
Volume

m3
-
Gross

kg
-
Each crate contains a certain number of arrester units and accessories for assembly and erection. A packing list is attached externally on each crate. Each separate crate is numbered and the numbers of all crates and their contents are listed in the shipping specification. Hitachi Energy reserves the right to pack arresters in the most effective/economic combination. Alternate or non-standard crates may involve additional charges. The table above is to be seen as an approximation and specific data for deliveries may differ from the values given.